Authorization Object: Q_INSPTYPE
Inspection Type For The Insp. Lot
Category: Quality Management
Definition
This authorization controls which inspection types a user may access.
The type of access is controlled by the transaction code authorization.
Click on the objects below, to expand data.
Object Fields
The list below includes the object’s fields, ordered by industry-standard importance:
QPRUEFART | Inspection Type | Filled in 25% of cases |
WERKS | Plant | Filled in 25% of cases |
Popularity Statistics
Average popularity of Q_INSPTYPE in roles: 0% (What does this mean?)
Average popularity of Q_INSPTYPE by users: 1% (What does this mean?)
Object Q_INSPTYPE is frequently used by users in the following areas:
BC:Basis Components
Environmental Analysis
1. Common authorization objects used with Q_INSPTYPE:
I_AUART | PM: Order Type | Objects appear together in 75% of cases |
C_ROUT | Authorizations For Routings | Objects appear together in 70% of cases |
S_RFC | Authorization Check For RFC Access | Objects appear together in 70% of cases |
B_USERSTAT | Status Management: Set/Delete User Status | Objects appear together in 50% of cases |
I_INGRP | PM: Maintenance Planner Group | Objects appear together in 50% of cases |
I_IWERK | PM: Maintenance Planning Plant | Objects appear together in 50% of cases |
I_KOSTL | PM: Cost Centers | Objects appear together in 50% of cases |
I_SWERK | PM: Maintenance Plant | Objects appear together in 50% of cases |
C_AFRU_APL | Confirmation: Authorization For Actual Work Center | Objects appear together in 45% of cases |
M_MATE_ZST | Material Master: Change Status Of Batches | Objects appear together in 45% of cases |
Q_STCK_CHG | Change Stock Posting Fields In UD Transactions | Objects appear together in 45% of cases |
C_AFRU_AWK | CIM: Confirmation | Objects appear together in 40% of cases |
Q_VORG_MEL | Business Process Quality Notifications | Objects appear together in 40% of cases |
I_QMEL | PM/QM: Notification Types | Objects appear together in 35% of cases |
K_VRGNG | CO: Bus. Trans., Actual Postings And Plan/Act. Allocations | Objects appear together in 35% of cases |
M_MATE_CHG | Material Master: Batches/Trading Units | Objects appear together in 30% of cases |
Q_MASTERD | Authorization For Master Data | Objects appear together in 30% of cases |
Q_UD_CODE | Using Usage Decision Codes | Objects appear together in 30% of cases |
Q_SPC | Change To Control Charts | Objects appear together in 25% of cases |
I_TCODE | PM: Transaction Code | Objects appear together in 20% of cases |
C_TCLS_MNT | Authorization For Characteristics Of Org. Area | Objects appear together in 15% of cases |
Q_CHAR_PRC | Recording Authorization For Insp. Results In An Operation | Objects appear together in 15% of cases |
Q_INSP_FIN | Inspection Completion With Open Char./Insp.Pts Req. Conf. | Objects appear together in 15% of cases |
C_TCLS_BER | Authorization For Org. Areas In Classification System | Objects appear together in 10% of cases |
K_CCA | CO-CCA: Gen. Authorization Object For Cost Center Accounting | Objects appear together in 10% of cases |
K_ORDER | CO-OPA: General Authorization Object For Internal Orders | Objects appear together in 10% of cases |
K_REPO_CCA | CO-CCA: Reporting On Cost Centers / Cost Elements | Objects appear together in 10% of cases |
K_REPO_OPA | CO-OPA: Reporting On Orders | Objects appear together in 10% of cases |
Q_GP_CODE | Use Of Group Codes | Objects appear together in 10% of cases |
Q_QMEL | Quality Notification Types | Objects appear together in 10% of cases |
C_TCLA_BKA | Authorization For Class Types | Objects appear together in 5% of cases |
Q_MATERIAL | Material Authorization | Objects appear together in 5% of cases |
Q_TCODE | QM Transaction Authorization | Objects appear together in 0% of cases |
S_TCODE | Transaction Code Check At Transaction Start | Objects appear together in 0% of cases |
2. Appearance of Q_INSPTYPE in T-Codes:
QA01A | Create Inspection Lot | Used in 100% of cases |
QA02A | Change Inspection Lot | Used in 100% of cases |
QAS3 | Upload Results (Obsolete) | Used in 100% of cases |
QAS4 | Upload UD (Obsolete) | Used in 100% of cases |
WAO_QA32WP | QA32 -Call from Workplace/MiniApp | Used in 100% of cases |
QA22 | Change inspection point quantities | Used in 95% of cases |
QA23 | Display insp.point quantities | Used in 95% of cases |
QE01 | Record characteristic results | Used in 95% of cases |
QE02 | Change characteristic results | Used in 95% of cases |
QE04 | Record sample results | Used in 95% of cases |
QE05 | Change sample results | Used in 95% of cases |
QE06 | Display sample results | Used in 95% of cases |
QE11 | Record results for inspection point | Used in 95% of cases |
QE12 | Change results for inspection point | Used in 95% of cases |
QE13 | Display results for inspection point | Used in 95% of cases |
QE14 | Record results for delivery note | Used in 95% of cases |
QE15 | Change results for delivery note | Used in 95% of cases |
QE16 | Display results for delivery note | Used in 95% of cases |
QE17 | Record results for equipment | Used in 95% of cases |
QE18 | Change results for equipment | Used in 95% of cases |
QE19 | Display results for equipment | Used in 95% of cases |
QE20 | Record results for funct. location | Used in 95% of cases |
QE21 | Change results for funct. location | Used in 95% of cases |
QE22 | Display results for funct. location | Used in 95% of cases |
QE51 | Results recording worklist | Used in 95% of cases |
QE53 | Worklist: Record results for equip. | Used in 95% of cases |
QE54 | Worklist: Results for funct. loctns | Used in 95% of cases |
QE72 | Tabular Results Rec. for Insp. Lots | Used in 95% of cases |
QE73 | Tabular res. recording for characs. | Used in 95% of cases |
QF11 | Record defects for inspection lot | Used in 95% of cases |
QF21 | Record defects for operation | Used in 95% of cases |
QF31 | Record defects for characteristic | Used in 95% of cases |
QE24 | Change results for phys. sample | Used in 90% of cases |
QE25 | Display results for phys. sample | Used in 90% of cases |
QE52 | Worklist: Results for phys. sample | Used in 90% of cases |
QE71 | Tabular res. recording for insp. pts | Used in 90% of cases |
QEW01 | Results Recording on Web | Used in 90% of cases |
QF01 | Record defect data | Used in 90% of cases |
QF02 | Change defect data | Used in 90% of cases |
QAC1 | Change insp. lot actual quantity | Used in 80% of cases |
QAC2 | Transfer stock to insp. lot | Used in 80% of cases |
QAC3 | Reset sample | Used in 80% of cases |
QE09 | Indiv.display of charac.result | Used in 80% of cases |
QEH1 | Worklist for Mobile Results Rec. | Used in 80% of cases |
QA01 | Create Inspection Lot | Used in 75% of cases |
QA16 | Collective UD for accepted lots | Used in 75% of cases |
QE03 | Display characteristic results | Used in 75% of cases |
QA12 | Change usage decision with history | Used in 70% of cases |
QA14 | Change UD without history | Used in 70% of cases |
QE51N | Results Recording Worklist | Used in 70% of cases |
QF03 | Display defect data | Used in 70% of cases |
QA02 | Change Inspection Lot | Used in 65% of cases |
QA11 | Record usage decision | Used in 65% of cases |
QA32WP | QA32 -Call from Workplace/MiniApp | Used in 65% of cases |
QE23 | Record results for phys. sample | Used in 65% of cases |
QA33 | Display data for inspection lot | Used in 60% of cases |
QA13 | Display usage decision | Used in 55% of cases |
QA32 | Change data for inspection lot | Used in 55% of cases |
QA03 | Display inspection lot | Used in 30% of cases |