Authorization Object: Q_TCODE
QM Transaction Authorization
Category: Quality Management
Definition
This object controls which QM transactions the user may access. The
field values are identical to the transaction code.
Click on the objects below, to expand data.
Object Fields
The list below includes the object’s fields, ordered by industry-standard importance:
| TCD | Transaction Code | Filled in 100% of cases |
Popularity Statistics
Average popularity of Q_TCODE in roles: 0% (What does this mean?)
Average popularity of Q_TCODE by users: 1% (What does this mean?)
Object Q_TCODE is frequently used by users in the following areas:
BC:Basis Components
Environmental Analysis
1. Common authorization objects used with Q_TCODE:
| Q_CERT_PRF | Maintenance Of Certificate Profiles | Objects appear together in 92% of cases |
| I_AUART | PM: Order Type | Objects appear together in 91% of cases |
| Q_CAT_SSET | Catalog Maintenance Of Selected Sets | Objects appear together in 91% of cases |
| Q_STA_QMTB | Maintain Inspection Methods Depending On Status | Objects appear together in 91% of cases |
| Q_STA_QPMK | Maintain Master Inspection Characs. Depending On Status | Objects appear together in 91% of cases |
| V_KOND_VEA | Maintain Condition: Auth. For Use/Appl./Cond.Type/Table | Objects appear together in 91% of cases |
| K_AUFK_ART | CO-OPA: Order Types | Objects appear together in 89% of cases |
| Q_CAT_GRP | Catalog Maintenance Of Group Codes And Codes | Objects appear together in 89% of cases |
| V_LIKP_VST | Delivery: Authorization For Shipping Points | Objects appear together in 89% of cases |
| C_CABN | Authorization For Characteristics Maintenance | Objects appear together in 85% of cases |
| S_BDS_DS | BC-SRV-KPR-BDS: Authorizations For Document Set | Objects appear together in 85% of cases |
| S_RFC | Authorization Check For RFC Access | Objects appear together in 85% of cases |
| C_AFRU_APL | Confirmation: Authorization For Actual Work Center | Objects appear together in 83% of cases |
| Q_STCK_CHG | Change Stock Posting Fields In UD Transactions | Objects appear together in 83% of cases |
| C_DRAW_BGR | Authorization For Authorization Groups | Objects appear together in 82% of cases |
| C_ROUT | Authorizations For Routings | Objects appear together in 82% of cases |
| C_PROJ_TCD | PS: Transaction-Specific Authorizations In Project System | Objects appear together in 80% of cases |
| Q_ROUT | Maintain Inspection Plan | Objects appear together in 80% of cases |
| C_DRAW_DOK | Authorization For Document Access | Objects appear together in 79% of cases |
| C_DRAW_TCD | Authorization For Document Activities | Objects appear together in 79% of cases |
| C_DRAW_TCS | Status-Dependent Authorizations For Documents | Objects appear together in 79% of cases |
| M_EINF_EKO | Purchasing Organization In Purchasing Info Record | Objects appear together in 79% of cases |
| M_EINF_WRK | Plant In Purchasing Info Record | Objects appear together in 79% of cases |
| M_MATE_ZST | Material Master: Change Status Of Batches | Objects appear together in 79% of cases |
| S_APPL_LOG | Applications Log | Objects appear together in 79% of cases |
| C_AFRU_AWK | CIM: Confirmation | Objects appear together in 77% of cases |
| Q_UD_CODE | Using Usage Decision Codes | Objects appear together in 77% of cases |
| S_WFAR_OBJ | Archivelink: Authorizations For Access To Documents | Objects appear together in 77% of cases |
| M_MATE_STA | Material Master: Maintenance Statuses | Objects appear together in 76% of cases |
| Q_SPC | Change To Control Charts | Objects appear together in 76% of cases |
| C_KLAH_BKP | Authorization For Class Maintenance | Objects appear together in 75% of cases |
| K_VRGNG | CO: Bus. Trans., Actual Postings And Plan/Act. Allocations | Objects appear together in 75% of cases |
| M_MATE_CHG | Material Master: Batches/Trading Units | Objects appear together in 75% of cases |
| M_MATE_WRK | Material Master: Plants | Objects appear together in 75% of cases |
| Q_CHAR_PRC | Recording Authorization For Insp. Results In An Operation | Objects appear together in 75% of cases |
| Q_INSP_FIN | Inspection Completion With Open Char./Insp.Pts Req. Conf. | Objects appear together in 75% of cases |
| S_TABU_DIS | Table Maintenance (Via Standard Tools Such As SM30) | Objects appear together in 75% of cases |
| Q_VORG_MEL | Business Process Quality Notifications | Objects appear together in 73% of cases |
| C_KLAH_BKL | Authorization For Classification | Objects appear together in 70% of cases |
| K_REPO_CCA | CO-CCA: Reporting On Cost Centers / Cost Elements | Objects appear together in 70% of cases |
| K_REPO_OPA | CO-OPA: Reporting On Orders | Objects appear together in 70% of cases |
| Q_INSPTYPE | Inspection Type For The Insp. Lot | Objects appear together in 70% of cases |
| Q_MASTERD | Authorization For Master Data | Objects appear together in 70% of cases |
| B_USERSTAT | Status Management: Set/Delete User Status | Objects appear together in 67% of cases |
| K_CCA | CO-CCA: Gen. Authorization Object For Cost Center Accounting | Objects appear together in 67% of cases |
| K_ORDER | CO-OPA: General Authorization Object For Internal Orders | Objects appear together in 66% of cases |
| C_DRAD_OBJ | Create/Change/Display/Delete Object Link | Objects appear together in 61% of cases |
| B_NOTIF | Follow-Up Functions For General Notifications | Objects appear together in 58% of cases |
| C_TCLS_MNT | Authorization For Characteristics Of Org. Area | Objects appear together in 58% of cases |
| I_KOSTL | PM: Cost Centers | Objects appear together in 58% of cases |
| Q_MATERIAL | Material Authorization | Objects appear together in 57% of cases |
| B_NOT_TASK | Access To Tasks In General Notifications | Objects appear together in 55% of cases |
| C_TCLS_BER | Authorization For Org. Areas In Classification System | Objects appear together in 55% of cases |
| I_BEGRP | PM: Authorization Group | Objects appear together in 52% of cases |
| I_INGRP | PM: Maintenance Planner Group | Objects appear together in 52% of cases |
| I_IWERK | PM: Maintenance Planning Plant | Objects appear together in 52% of cases |
| I_SWERK | PM: Maintenance Plant | Objects appear together in 52% of cases |
| Q_GP_CODE | Use Of Group Codes | Objects appear together in 44% of cases |
| I_QMEL | PM/QM: Notification Types | Objects appear together in 39% of cases |
| C_TCLA_BKA | Authorization For Class Types | Objects appear together in 33% of cases |
| Q_QMEL | Quality Notification Types | Objects appear together in 32% of cases |
| I_TCODE | PM: Transaction Code | Objects appear together in 30% of cases |
| S_TCODE | Transaction Code Check At Transaction Start | Objects appear together in 0% of cases |
2. Appearance of Q_TCODE in T-Codes:
| /SAPSMOSS/QM50 | Time line display:R/3 notifications | Used in 100% of cases |
| CVDA | EHS: Create Variant Conditions | Used in 100% of cases |
| CVDB | EHS: Change Variant Conditions | Used in 100% of cases |
| CVDC | EHS: Display Variant Conditions | Used in 100% of cases |
| CVDD | EHS: Create Variant Cond. w. Templ. | Used in 100% of cases |
| OQIA | Maintain variant: Q-level evaluation | Used in 100% of cases |
| OQIC | Work list variant for results rec. | Used in 100% of cases |
| OQS8 | Customizing for IQS8 | Used in 100% of cases |
| QA01A | Create Inspection Lot | Used in 100% of cases |
| QA02A | Change Inspection Lot | Used in 100% of cases |
| QA09 | No. range maintenance for insp.lots | Used in 100% of cases |
| QA19 | Automatic usage decision | Used in 100% of cases |
| QAS1 | Download Insp. Specs. (Obsolete) | Used in 100% of cases |
| QAS2 | Download Basic Data (Obsolete) | Used in 100% of cases |
| QAS3 | Upload Results (Obsolete) | Used in 100% of cases |
| QAS4 | Upload UD (Obsolete) | Used in 100% of cases |
| QC11 | Create cert. profile assignment | Used in 100% of cases |
| QC12 | Change cert. profile assignment | Used in 100% of cases |
| QC13 | Display cert. profile assignment | Used in 100% of cases |
| QC14 | Create cert.prof.assign.w/copy model | Used in 100% of cases |
| QCC0 | QM: Direct Access to IMG | Used in 100% of cases |
| QD35 | Delete job overview for Q-levels | Used in 100% of cases |
| QS43 | Maintain catalog | Used in 100% of cases |
| QS44 | Maintain catalog | Used in 100% of cases |
| QS45 | Display catalog | Used in 100% of cases |
| QS47 | Central replacement of code groups | Used in 100% of cases |
| QS4A | Display catalog | Used in 100% of cases |
| QS53 | Maintain individual selected set | Used in 100% of cases |
| QS54 | Maintain selected set | Used in 100% of cases |
| QS55 | Display selected set | Used in 100% of cases |
| QST03 | Display Stability History | Used in 100% of cases |
| QST04 | Display Inspection Plans | Used in 100% of cases |
| QST05 | Graphical Scheduling Overview | Used in 100% of cases |
| QST06 | Scheduling Overview (StabilityStudy) | Used in 100% of cases |
| QST07 | Change Testing Schedule Items | Used in 100% of cases |
| QST08 | Display Testing Schedule Items | Used in 100% of cases |
| WAO_QA32WP | QA32 -Call from Workplace/MiniApp | Used in 100% of cases |
| WAO_QM10WP | QM10 – Call from Workplace/MiniApp | Used in 100% of cases |
| WAO_QM13WP | QM13 – Call from Workplace/MiniApp | Used in 100% of cases |
| QA05 | Job planning: Periodic inspection | Used in 98% of cases |
| QA06 | Job overview: Periodic inspection | Used in 98% of cases |
| QA07L | Deadline Monitoring Log | Used in 98% of cases |
| QA08 | Collective Processing of Insp. Setup | Used in 98% of cases |
| QA22 | Change inspection point quantities | Used in 98% of cases |
| QA23 | Display insp.point quantities | Used in 98% of cases |
| QC01 | Create certificate profile | Used in 98% of cases |
| QC02 | Change certificate profile | Used in 98% of cases |
| QC03 | Display certificate profile | Used in 98% of cases |
| QC06 | Immediate delete of cert. profiles | Used in 98% of cases |
| QC15 | Create cert. profile assignment | Used in 98% of cases |
| QC16 | Change cert. profile assignment | Used in 98% of cases |
| QC17 | Display cert. profile assignment | Used in 98% of cases |
| QC18 | Create cert.prof.assign.w/copy model | Used in 98% of cases |
| QC40 | Internet Certificate for Delivery | Used in 98% of cases |
| QC40A | Internet Certificate for Delivery | Used in 98% of cases |
| QC42 | Batch certificate on WWW | Used in 98% of cases |
| QD34 | Delete quality level planning | Used in 98% of cases |
| QDB1 | Maintain allowed relationships | Used in 98% of cases |
| QDP1 | Create sampling scheme | Used in 98% of cases |
| QDP2 | Change sampling scheme | Used in 98% of cases |
| QDP3 | Display sampling scheme | Used in 98% of cases |
| QDR1 | Create dynamic modification rule | Used in 98% of cases |
| QDR2 | Change dynamic modification rule | Used in 98% of cases |
| QDR3 | Display dynamic modification rule | Used in 98% of cases |
| QDR6 | Disp. where-used list-dyn. mod. rule | Used in 98% of cases |
| QDR7 | Replace dynamic mod. rule used | Used in 98% of cases |
| QDV6 | Uses: Sampling procedures | Used in 98% of cases |
| QDV7 | Replace sampling procedure used | Used in 98% of cases |
| QE01 | Record characteristic results | Used in 98% of cases |
| QE02 | Change characteristic results | Used in 98% of cases |
| QE04 | Record sample results | Used in 98% of cases |
| QE05 | Change sample results | Used in 98% of cases |
| QE06 | Display sample results | Used in 98% of cases |
| QE11 | Record results for inspection point | Used in 98% of cases |
| QE12 | Change results for inspection point | Used in 98% of cases |
| QE13 | Display results for inspection point | Used in 98% of cases |
| QE14 | Record results for delivery note | Used in 98% of cases |
| QE15 | Change results for delivery note | Used in 98% of cases |
| QE16 | Display results for delivery note | Used in 98% of cases |
| QE17 | Record results for equipment | Used in 98% of cases |
| QE18 | Change results for equipment | Used in 98% of cases |
| QE19 | Display results for equipment | Used in 98% of cases |
| QE20 | Record results for funct. location | Used in 98% of cases |
| QE21 | Change results for funct. location | Used in 98% of cases |
| QE22 | Display results for funct. location | Used in 98% of cases |
| QE51 | Results recording worklist | Used in 98% of cases |
| QE53 | Worklist: Record results for equip. | Used in 98% of cases |
| QE54 | Worklist: Results for funct. loctns | Used in 98% of cases |
| QE72 | Tabular Results Rec. for Insp. Lots | Used in 98% of cases |
| QE73 | Tabular res. recording for characs. | Used in 98% of cases |
| QF11 | Record defects for inspection lot | Used in 98% of cases |
| QF21 | Record defects for operation | Used in 98% of cases |
| QF31 | Record defects for characteristic | Used in 98% of cases |
| QI01 | Create quality info. – purchasing | Used in 98% of cases |
| QI02 | Change qual.information – purchasing | Used in 98% of cases |
| QI04 | Job planning for QM procurement keys | Used in 98% of cases |
| QI05 | Mass maintenance QM procurement keys | Used in 98% of cases |
| QI06 | QM Releases: Mass maintenance | Used in 98% of cases |
| QI08 | Job overview of QM procurement keys | Used in 98% of cases |
| QL41 | Distribute Code Groups (ALE) | Used in 98% of cases |
| QM19 | List of Q Notifications, Multi-Level | Used in 98% of cases |
| QMW1 | Create quality notification (WWW) | Used in 98% of cases |
| QP05 | Print inspection plan | Used in 98% of cases |
| QP60 | Time-related development of plans | Used in 98% of cases |
| QP61 | Display change documents insp.plan | Used in 98% of cases |
| QP62 | Change documents ref.operation sets | Used in 98% of cases |
| QPR7 | Storage Data Maintenance | Used in 98% of cases |
| QPV2 | Maintain sample drawing procedure | Used in 98% of cases |
| QPV3 | Display sample drawing procedure | Used in 98% of cases |
| QS38 | Display inspection method list | Used in 98% of cases |
| QS61 | Maintain material specification | Used in 98% of cases |
| QS63 | Maintain material spec: Planning | Used in 98% of cases |
| QS65 | Activate material specification | Used in 98% of cases |
| QV51 | Create control for QM in SD | Used in 98% of cases |
| QV52 | Change control for QM in SD | Used in 98% of cases |
| QVM1 | Inspection lots without completion | Used in 98% of cases |
| /SAPSMOSS/QM10 | Change list of R/3 notificatiions | Used in 97% of cases |
| /SAPSMOSS/QM11 | Display list of R/3 notifications | Used in 97% of cases |
| /SAPSMOSS/QM12 | Change list of tasks | Used in 97% of cases |
| /SAPSMOSS/QM13 | Display list of tasks | Used in 97% of cases |
| QA10 | Trigger automatic usage decision | Used in 97% of cases |
| QA10L | Log for Automatic Usage Decision | Used in 97% of cases |
| QA17 | Job planning for auto usage decision | Used in 97% of cases |
| QA18 | Job overview for auto usage decision | Used in 97% of cases |
| QA40 | Auto. Usage Decision for Production | Used in 97% of cases |
| QA40L | Log for Automatic Usage Decision | Used in 97% of cases |
| QA41 | Scheduling UD for Production Lots | Used in 97% of cases |
| QA42 | Job planning: UD prod. insp.lots | Used in 97% of cases |
| QC20 | Certificates for Deliveries | Used in 97% of cases |
| QC21 | Quality certificate for the insp.lot | Used in 97% of cases |
| QC31 | Archive display: Delivery item | Used in 97% of cases |
| QC32 | Archive display: Inspection lot | Used in 97% of cases |
| QDV1 | Create sampling procedure | Used in 97% of cases |
| QDV2 | Change sampling procedure | Used in 97% of cases |
| QDV3 | Display sampling procedure | Used in 97% of cases |
| QE24 | Change results for phys. sample | Used in 97% of cases |
| QE25 | Display results for phys. sample | Used in 97% of cases |
| QE52 | Worklist: Results for phys. sample | Used in 97% of cases |
| QE71 | Tabular res. recording for insp. pts | Used in 97% of cases |
| QEW01 | Results Recording on Web | Used in 97% of cases |
| QF01 | Record defect data | Used in 97% of cases |
| QF02 | Change defect data | Used in 97% of cases |
| QGD1 | Test Equipment Usage List | Used in 97% of cases |
| QGD2 | Test Equipment Tracking | Used in 97% of cases |
| QGP2 | Results History for Task List Charac | Used in 97% of cases |
| QK01 | Assign QM order to material | Used in 97% of cases |
| QK02 | Display assigned QM orders | Used in 97% of cases |
| QK04 | Create QM order | Used in 97% of cases |
| QL11 | Mat: Distribute Inspection Setup-ALE | Used in 97% of cases |
| QL21 | Master Inspection Characs (ALE) | Used in 97% of cases |
| QL31 | Distribute Inspection Methods (ALE) | Used in 97% of cases |
| QM16 | Change activity list | Used in 97% of cases |
| QP06 | List: Missing/unusable insp. plans | Used in 97% of cases |
| QP07 | List: Missing/Unusable GR InspPlans | Used in 97% of cases |
| QPR1 | Create physical sample | Used in 97% of cases |
| QS21 | Create master insp. characteristic | Used in 97% of cases |
| QS22 | Create master insp. charac. version | Used in 97% of cases |
| QS23 | Change master insp. charac. version | Used in 97% of cases |
| QS25 | Delete master insp. charac. version | Used in 97% of cases |
| QS26 | Display characteristic use | Used in 97% of cases |
| QS27 | Replace master insp. characteristic | Used in 97% of cases |
| QS31 | Create inspection method | Used in 97% of cases |
| QS32 | Create inspection method version | Used in 97% of cases |
| QS33 | Change inspection method version | Used in 97% of cases |
| QS35 | Delete inspection method version | Used in 97% of cases |
| QS36 | Display inspection method use | Used in 97% of cases |
| QS37 | Central replacement of methods | Used in 97% of cases |
| QS46 | Display code group use | Used in 97% of cases |
| QS51 | Edit Selected Sets | Used in 97% of cases |
| QS52 | Display selected set index | Used in 97% of cases |
| QS58 | Usage indicator – selected sets | Used in 97% of cases |
| QS66 | Plan activation of material spec. | Used in 97% of cases |
| QS67 | Job overview: Activate mat. spec. | Used in 97% of cases |
| QA52 | Source inspections: Job overview | Used in 95% of cases |
| QC22 | Quality Certificate for Batch | Used in 95% of cases |
| QGA1 | Display quality score time line | Used in 95% of cases |
| QGA2 | Display inspection results | Used in 95% of cases |
| QGP1 | Results history for task list charac | Used in 95% of cases |
| QI07 | Incoming insp. and open pur. orders | Used in 95% of cases |
| QS41 | Maintain catalog | Used in 95% of cases |
| QS42 | Display catalog | Used in 95% of cases |
| QS48 | Usage indicator – code groups | Used in 95% of cases |
| QA51 | Scheduling Source Inspections | Used in 94% of cases |
| QAC1 | Change insp. lot actual quantity | Used in 94% of cases |
| QAC2 | Transfer stock to insp. lot | Used in 94% of cases |
| QAC3 | Reset sample | Used in 94% of cases |
| QDH1 | Q-level evaluation: Change data | Used in 94% of cases |
| QDL1 | Create quality level | Used in 94% of cases |
| QDL2 | Change quality level | Used in 94% of cases |
| QE09 | Indiv.display of charac.result | Used in 94% of cases |
| QK05 | Confirmed activities for insp. lot | Used in 94% of cases |
| QM50 | Time line display Q notifications | Used in 94% of cases |
| QPR2 | Change physical sample | Used in 94% of cases |
| QPR3 | Display physical sample | Used in 94% of cases |
| QPR4 | Confirm physical sample drawing | Used in 94% of cases |
| QPR6 | Create new phys.-samp. drawing w.ref | Used in 94% of cases |
| QS28 | Display insp. charac. list | Used in 94% of cases |
| QS34 | Display inspection method version | Used in 94% of cases |
| QVM2 | Inspection lots with open quantities | Used in 94% of cases |
| QA01 | Create Inspection Lot | Used in 92% of cases |
| QA07 | Trigger for recurring inspection | Used in 92% of cases |
| QA16 | Collective UD for accepted lots | Used in 92% of cases |
| QDL3 | Display quality level | Used in 92% of cases |
| QE03 | Display characteristic results | Used in 92% of cases |
| QM10 | Change list of quality notifications | Used in 92% of cases |
| QM14 | Change list of items | Used in 92% of cases |
| QPR5 | Manual inspection lots for physSamps | Used in 92% of cases |
| QS62 | Display material specification | Used in 92% of cases |
| QS64 | Display material spec: For key date | Used in 92% of cases |
| QVM3 | Lots without usage decision | Used in 92% of cases |
| QA12 | Change usage decision with history | Used in 91% of cases |
| QA14 | Change UD without history | Used in 91% of cases |
| QDH2 | Q-level evaluation: Display data | Used in 91% of cases |
| QE51N | Results Recording Worklist | Used in 91% of cases |
| QF03 | Display defect data | Used in 91% of cases |
| QGA3 | Print inspection results | Used in 91% of cases |
| QI03 | Display quality info. – purchasing | Used in 91% of cases |
| QM01 | Create quality notification | Used in 91% of cases |
| QM15 | Display list of items | Used in 91% of cases |
| QM17 | Display activity list | Used in 91% of cases |
| QS24 | Display master insp. charac. version | Used in 91% of cases |
| QS59 | Display selected sets | Used in 91% of cases |
| QV53 | Display control for QM in SD | Used in 91% of cases |
| QA02 | Change Inspection Lot | Used in 89% of cases |
| QA11 | Record usage decision | Used in 89% of cases |
| QA32WP | QA32 -Call from Workplace/MiniApp | Used in 89% of cases |
| QE23 | Record results for phys. sample | Used in 89% of cases |
| QGC1 | Qual. control charts for insp. lots | Used in 89% of cases |
| QGC2 | Control charts for task list charac. | Used in 89% of cases |
| QGC3 | Control charts for master insp. char | Used in 89% of cases |
| QM02 | Change quality notification | Used in 89% of cases |
| QM12 | Change list of tasks | Used in 89% of cases |
| QS49 | Display code groups and codes | Used in 89% of cases |
| IQS8WP | IQS8 – Call from Workplace/MiniApp | Used in 88% of cases |
| IQS9WP | IQS9 – Call from Workplace/MiniApp | Used in 88% of cases |
| QA33 | Display data for inspection lot | Used in 88% of cases |
| QM10WP | QM10 – Call from Workplace/MiniApp | Used in 88% of cases |
| QM13WP | QM13 – Call from Workplace/MiniApp | Used in 88% of cases |
| QA13 | Display usage decision | Used in 86% of cases |
| QA32 | Change data for inspection lot | Used in 86% of cases |
| QM11 | Display List of Qual. Notifications | Used in 85% of cases |
| IQS21 | Create Notif. – Simplified View | Used in 83% of cases |
| QM13 | Display list of tasks | Used in 83% of cases |
| IQS1 | Create Notification – Extended View | Used in 82% of cases |
| IQS12 | Process Task | Used in 82% of cases |
| IQS2 | Change Notification – Extended View | Used in 80% of cases |
| QM03 | Display quality notification | Used in 80% of cases |
| IQS22 | Process Notif. – Simplified View | Used in 79% of cases |
| QA03 | Display inspection lot | Used in 79% of cases |
| IQS13 | Display Task | Used in 77% of cases |
| IQS23 | Display Notif. – Simplified View | Used in 73% of cases |
| IQS8 | Worklist: Notifications (General) | Used in 73% of cases |
| IQS9 | Worklist: Tasks (General) | Used in 73% of cases |
| IQS3 | Display Notification – Extended View | Used in 72% of cases |